Shenzhen Tiancheng Lighting Limited company to welcome you！ National Service Hotline：4008-320-328
| 3030LED Patch Lighting Parameters (What is the difference between 3030 lamp bead |
| Time:2022-10-09 00:00:00 | view： |
|
Hello everyone will introduce today 3030LED patch lamp beads Parameters, what are the differences between 3030 lamp beads and 5050, the following is the summary of this issue, let's take a look. high -power LED patch 3030 lamp beads how much can the light flux be achieved?Tiancheng's high-power 3030 lamp power is 1W of 1W, which can achieve 130-150LM. What is the difference between 5050 lamp beads and 3030 lamp beads?The types of LED lamp beads are basically classified according to its overall size. 5050 is a patch LED lamp bead with a length and width of 5mm. LED lamp beads. So the first difference is the size. The differences in other aspects are not particularly large, similar to 5050, 3030 is also particularly suitable for the production of the lamp belt, etc. In addition, there are different colors, power, voltage and other parameters. You can follow your own actual situation. Requirements to choose. LED patching lamp beads in total?LED patch lamp beads have five specifications: 6730, 3030, 3014, 2835, 3528, 5050. 1. 5730 (5630) belongs to Samsung's high-power structure, 0.5W each, and the current is 100-150mA. 2. 3030 is Kori's high-power structure. Each 1W is used to use a current of 300-350mA. This structure also has a light bulb of 3W (actually 2W and the current 600mA). 3. 3014 is a low -power, 0.1W per piece, and the current is 30mA. Because the bottom is used for heat dissipation, it is greater than the traditional low -power current. 4, 2835 is low power, 0.1W and 0.2W each. The current is 30mA and 60mA. Because the bottom surface heat dissipation is larger than the heat dissipation area of \u200b\u200b3014, the current can be larger. Of course, consider the size of the chip. Some people also make it 0.3W and 0.5W. 5, 3528 is a traditional low power, 0.06W per unit, and the operating current is within 20mA. 6, 5050 is also a traditional low power. Each 0.06*3W, using a current with a current of less than 20*3mA, has three chips inside, so the current is also three times the traditional. Expanded information: LED LED, also known as SMDLED, is a simple lamp. Its luminous principle is to turn the current to the semiconductor of the compound. Through the combination of electronics and the cave, excess energy will be released in the form of light to achieve glowing. Effect. 3030 Patch 1W Lighting Bad operating voltage is 6V, which current is The power ÷ voltage is equal to the current, 1 ÷ 6 \u003d 0.167A, which is 167mA. LED bulb beads and patch power principles The patch in the LED bulb in the market, the so -called patch is collectively referred to as \"chip\". Next, the structure of the chip is generally divided into round chips and square chips. Among them, round chips are relatively popular than lighting. Round chips and square chips generally represent the two categories of numbers: 5050, 3030 in the square chip. There are 2835, 5630, 5730 and so on. Fang -shaped chips do not recommend buying and selling, but still appear in the market. The round chip strongly recommends wholesale trading on Lanba.com. Let ’s talk about the power of the round chip number: the 2835 chip has the smallest power, the actual power is 0.2, and the light emitting effect is not as good as 5630 chips. 5630 chips and 5730 chips are 0.5, but the quality of 5630 patch is not as good as 5730 patch. The 5630 patch and 5730 patch are called Bolk board and aluminum -based plates (5630 chip is Gobelin Gibrobius. The board, 5730 chip is an aluminum substrate). There is also a smart chip is RGB patch, which can emit seven different lights: red, blue, green, purple, white, yellow, and orange white light are called colorful bulbs. In addition, a bulb chip is South Korea's Samsung 4343 chip. This chip belongs to imported goods and is relatively rare in China. Let's talk about the principle of LED lamp beads. Compared with the LED patch, LED lamp beads are better. Why is it better? Because the LED patch is 0.5W, the power of LED lamp beads is 1W, the relative brightness is relatively light, and the LED lamp beads are the largest power. In what kind of LED lamps do LED lamp beads appear on the market? Only these styles are explained here: ceiling lights, wall lamps, ceiling lights, etc. The above is Xiaobian's answers to 3030LED patch lamp beads Parameters, what are the differences between 3030 lamp beads and 5050, I hope it will be useful to you |
