What are the differences between 5050 lamp beads and 3030 lamp beads?

1, the packaging size is different:

(1), 5050 refers to LED lamp beads with a length and width of 5.0*5.0mm.

2. Different colors:

(1), 3030 lamp beads are just monochrome.

3, different power:

(1), 3030 lamp beads are 0.2-1W.

One and 5050RGB lamp beads are a type of LED lamp beads. 5050 is named after product size. RGB refers to the three base colors of red, green, and blue light.

3, EMC3030 is an innovative high -power LED product. Its principles are the same as the EMC3014. They are all light beads made of new materials EMC.

4. Product characteristics are high temperature resistance, long life, and high resistance UV.

Five, specific parameters:

1. color temperature: 2870-3220k; 3985-4503k; 5665-6530K.

2, Xianxian: 70-75ra.

3, light effect: 105-130LM/W.

4. Light flux: 90-100LM; 100-110LM; 110-120LM.

Tiancheng 5050RGB lamps parameters,

can be customized, for example, you need to be customized by different brightness, different bands, and different feet. Of course, the specific consulting suppliers are more accurate.

1. High brightness: The brightness of a single LED patch lamp bead can be as high as: 1200-1500mcd

2. Low attenuation: The company uses the best quality materials for imports, plus the advanced packaging process, the attenuation of the product can be controlled by thousands of points to a thousand points Within the two.

3. Good light consistency

4. Life span: The product uses high -quality material packaging, good heat dissipation effect, the product life can be more than 50,000 hours. The highest brightness, the best quality, and the representative of high -end products, but the price is the equivalent of mid -range products, the highest cost -effective product.

Bar, soft lamp bar, hard lamp bar, magic lamp bar, etc. The application field is very wide. First of all, the conventional 5050 lamp beads without SK6812 are actually the same The IC controller is added, but the IC controller on the line board does not need to bring IC.

What are the benefits of the IC controller to the inside of the lamp beads

1. Each lamp bead has built -in SK6812 controller to achieve pixel -level control

2, SK6812 packaging to the inside of the lamp beads to prevent the IC controller from being trendy Damage

3, built -in SK6812 can avoid the lamp bar that causes the IC pin and the line board to cause failure when bending and twisting

4. The IC controller is built into the inside of the lamp to make the finished line board easier and simple, thereby reducing the fault Rate, improve reliability.